Showing raw Markdown: the renderer could not load.
Inside a building or a data centre, most traffic never touches a router: switches move it between devices on the same network. This module explains how a switch learns where devices are, how **virtual LANs (VLANs)** split one physical switch into separate networks, how traffic moves between VLANs, why loops are dangerous and how the Spanning Tree Protocol prevents them, and which Layer 2 attacks you need to defend against. ## Learning objectives By the end of this module you will be able to: 1. Explain how a switch learns MAC addresses, forwards and floods frames, and what a broadcast domain is. 2. Describe VLANs, IEEE 802.1Q tagging, and the difference between access and trunk ports. 3. Compare inter-VLAN routing options: router-on-a-stick and Layer 3 switches. 4. Explain why switching loops happen and what the Spanning Tree Protocol (STP) and Rapid STP do about them. 5. Assess Layer 2 attacks (MAC flooding, VLAN hopping) and the defences against them (port security, trunk hardening). ## Prerequisites - [04 — The OSI Model](../04-osi-model/README.md) and [06 — Subnetting](../06-subnetting/README.md). - For the lab: a Linux machine or virtual machine (VM) with `sudo`, the `ip` and `bridge` commands (iproute2) and `tcpdump`. ## Contents | Type | Duration | |---|---| | [Theory](lesson.md) | 50 min | | [Hands-on lab: building a VLAN-aware switch with Linux namespaces](lab.md) | 60 min | | [Assessment (10 questions)](quiz.md) | 15 min | ## Further reading - IEEE 802.1Q — Bridges and Bridged Networks (VLAN tagging; also includes the Rapid and Multiple Spanning Tree protocols) - IEEE 802.1D — MAC Bridges (original Spanning Tree Protocol) - [Linux bridge documentation](https://docs.kernel.org/networking/bridge.html)