Showing raw Markdown: the renderer could not load.
## Questions ### 1. Which statement correctly describes the IPv6 base header? *Objective: 1. Explain why IPv6 exists and how it differs from IPv4.* - A) It is 20–60 bytes long, because options are carried inside the base header as in IPv4. - B) It is a fixed 40 bytes; optional information goes in extension headers chained through the Next Header field. - C) It is a fixed 40 bytes and includes a header checksum that every router recomputes after decrementing the Hop Limit. - D) It is a fixed 40 bytes and includes a flag that marks a packet as a broadcast. ### 2. A small office replaces IPv4 with NAT by IPv6, and every printer now has a global unicast address. The manager asks whether the printers are now exposed to the Internet. What is the most accurate answer? *Objective: 1. Explain why IPv6 exists and how it differs from IPv4.* - A) No: IPv6 addresses are too long for anyone on the Internet to find a printer. - B) Yes, unavoidably: printers must be kept on IPv4 with NAT to stay protected. - C) It depends on the firewall: without NAT, a stateful firewall with a default-deny inbound policy decides what can reach the printers. - D) No: IPv6 hosts only accept connections from addresses in their own `/64`. ### 3. What is the RFC 5952 text form of `2001:0db8:00a0:0000:0000:0bc0:0000:0000`? *Objective: 2. Read and write IPv6 addresses following RFC 5952, and identify address types and scopes.* - A) `2001:db8:a0::bc0:0:0` - B) `2001:db8:a0:0:0:bc0::` - C) `2001:db8:a::bc0:0:0` - D) `2001:db8:a0::bc0::` ### 4. A packet capture on a LAN shows this line. What is the packet doing? *Objective: 2. Read and write IPv6 addresses following RFC 5952, and identify address types and scopes.* ```text IP6 2001:db8:acad:20::5 > ff02::1:ff2c:9a41: ICMP6, neighbor solicitation, who has 2001:db8:acad:20:7d10:e83b:6e2c:9a41, length 32 ``` - A) Broadcasting a question to every host on the link, as ARP does in IPv4. - B) Running duplicate address detection for `2001:db8:acad:20::5` before using it. - C) Sending a query to a global-scope multicast group that reaches the whole Internet. - D) Asking the solicited-node group of `…:6e2c:9a41` for that address's link-layer (MAC) address. ### 5. A router's Router Advertisements have M=0, O=1, and a `/64` Prefix Information Option with A=1. What do typical hosts on that link do? *Objective: 3. Explain how a host configures itself: NDP, Router Advertisements and their flags, SLAAC, temporary addresses and DHCPv6.* - A) Request an address from a DHCPv6 server and take DNS servers from the RA. - B) Build their addresses with SLAAC and ask DHCPv6 only for other settings such as DNS servers (stateless DHCPv6). - C) Keep only their link-local addresses, because O=1 disables autoconfiguration. - D) Ignore the RA and wait for an administrator to configure static addresses. ### 6. A laptop shows the interface ID `200:5eff:fe00:5310` in its global address at home, at a café and at the office. Why is this a privacy problem, and what addresses it? *Objective: 3. Explain how a host configures itself: NDP, Router Advertisements and their flags, SLAAC, temporary addresses and DHCPv6.* - A) It isn't a problem: the prefix changes on each network, so the full address is never the same. - B) The `200` at the start reveals the operating system; changing the hostname fixes it. - C) It is only a problem for link-local addresses; global addresses are never logged by remote servers. - D) It is a modified EUI-64 ID built from the MAC address, identical everywhere, so the laptop can be tracked across networks; stable privacy (RFC 7217) and temporary (RFC 8981) addresses avoid that. ### 7. A site has been assigned `2001:db8:4c00::/56`. Which of these segments belongs to the site? *Objective: 4. Plan IPv6 subnetting for a site.* - A) `2001:db8:4c00:100::/64` - B) `2001:db8:4c01::/64` - C) `2001:db8:4c00:ff::/64` - D) `2001:db8:4c00:1ff::/64` ### 8. To "save space," an engineer configures a new IoT VLAN with a `/80` prefix and leaves SLAAC enabled on the router. What happens? *Objective: 4. Plan IPv6 subnetting for a site.* - A) Hosts ignore the prefix for SLAAC, because 80 + 64 ≠ 128, so devices that rely on SLAAC get no global address. - B) Hosts shorten their interface IDs to 48 bits and SLAAC works normally. - C) Nothing changes: the router automatically advertises a `/64` instead. - D) The VLAN works, and the saved addresses can be reused for other VLANs in the same `/64`, which is the recommended practice. ### 9. A mobile carrier wants its phones to be IPv6-only but still reach websites that only have IPv4 addresses. Which approach fits? *Objective: 5. Compare coexistence strategies and assess IPv6-specific risks.* - A) Dual stack, giving every phone its own public IPv4 address. - B) Automatic 6to4 tunnels from each phone. - C) Sending IPv4-mapped addresses (`::ffff:0:0/96`) across the carrier network to the websites. - D) NAT64 with DNS64, which synthesizes AAAA records using a prefix such as `64:ff9b::/96`. ### 10. In an office that "only uses IPv4," someone plugs a home router into a desk port. Minutes later, nearby laptops have a new IPv6 prefix and default route pointing at that router. Which control is designed to prevent this? *Objective: 5. Compare coexistence strategies and assess IPv6-specific risks.* - A) RA Guard on the access switches, so only ports facing authorized routers may send Router Advertisements. - B) A DHCPv6 reservation for every laptop on the office DHCPv6 server. - C) Blocking ICMPv6 echo request (type 128) at the Internet firewall. - D) Removing all AAAA records from the company's DNS zone. --- ## Answer key <details> <summary>Show answers</summary> | # | Answer | Explanation | |---|---|---| | 1 | B | The IPv6 base header is always 40 bytes; options moved to extension headers linked by Next Header. IPv6 removed the header checksum (C) and has no broadcast at all (D). | | 2 | C | Without NAT, every device has a globally unique address, so reachability is decided by firewall policy. A default-deny inbound stateful firewall gives the protection people credited to NAT. Address length (A) is obscurity, not security. | | 3 | A | Leading zeros go and there are two runs of two zero groups: RFC 5952 compresses the leftmost run. B compresses the right run instead, C drops a significant zero from `a0`, and D uses `::` twice, which is invalid. | | 4 | D | `ff02::1:ff2c:9a41` is the solicited-node group (`ff02::1:ff` plus the last 24 bits) for the target address; the NS asks its owner for its MAC address. It isn't DAD (B): a DAD probe is sent from `::`, and the target would be the sender's own tentative address. `ff02` is link-local scope (C). | | 5 | B | A=1 lets hosts build addresses with SLAAC; O=1 says other configuration is available from DHCPv6, so hosts use stateless DHCPv6 for DNS and similar options. A describes M=1 (stateful DHCPv6). | | 6 | D | `ff:fe` in the middle and a flipped universal/local bit mark a modified EUI-64 interface ID, which embeds the MAC and stays the same on every network. Remote servers see the global address, so the constant IID lets them link the laptop's visits (A, C are wrong). | | 7 | C | A `/56` fixes the first two hex digits of the fourth group, so this site's subnet IDs run from `0000` to `00ff`. `ff` is inside; `100` and `1ff` (A, D) belong to the next `/56`, and `4c01` (B) is a different `/48`. | | 8 | A | SLAAC needs prefix length + 64-bit interface ID = 128; RFC 4862 tells hosts to ignore the prefix otherwise. Devices that only support SLAAC, such as Android, end up without a global address. Every segment should be a `/64`. | | 9 | D | NAT64/DNS64 is built for IPv6-only clients reaching IPv4-only servers: DNS64 synthesizes an IPv6 address embedding the IPv4 address, and NAT64 translates. A contradicts "IPv6-only," 6to4 is deprecated (RFC 7526), and IPv4-mapped addresses are not used on the wire. | | 10 | A | Any host can send RAs, and IPv6 is enabled by default on the laptops. RA Guard (RFC 6105) drops RAs on ports that shouldn't have routers. DHCPv6 (B) doesn't control the default route, which comes only from RAs. | </details>